纵轴式掘进机转运机构方案设计及其技术设计.docVIP

中文题目：纵轴式掘进机转运机构方案设计及其技术设计 外文题目：D LONGITUDINAL ROADHEADER TRANSPORT MECHANISM 毕业设计（论文）共 52页（其中：外文文献及译文 10 页）图纸共 张 完成日期2015年6月 答辩日期2015年6月 Abstract The driving machine is the important equipment of tunnel excavation and tunnel construction, which has the function of cutting, loading, transporting, walking independently, spraying dust and dust etc.. But with accelerating modernization, the rapid development of mining machinery, as well as demand for energy and construction is increasing, roadheader performance can not fully meet the requirements, there is an urgent request to design to meet the requirements of working conditions of new type roadheader. The transport mechanism of the tunneling machine is the important working mechanism of the tunneling machine, and the transportation capacity of the transportation mechanism directly influences the driving speed of the tunneling machine.. This design is mainly to the transport mechanism of longitudinal roadheader design and technical design. Through the application of tunnel boring machine design of a series of knowledge, the transport mechanism of roadheader be analysis and design, transportation system using scraper conveyor, hydraulic motor driven, cancel the transfer speed reducer, Department of transportation according to need to use round link chain for edge double chain, transport structure is more compact, running a more coordinated, and reduce the occurrence of the fault, to better adapt to the underground complex tunnel. Key words: Roadheader; transport mechanism design; double side chain 目录 摘要 I Abstract II 前言 1 1 概述 2 1.1 国内外掘进机的发展、现状 2 1.1.1国外掘进机的发展概况 2 1.1.2国内掘进机的发展概况 3 1.2掘进机技术的发展趋势 3 1.3掘进机的基本组成 4 2 转运机构方案设计 6 2.1 结构方案设计 6 2.1.1 运输方式选择 6 2.1.2刮板输送机的结构形式选择 8 2.1.3刮板输送机的布置形式选择 9 2.1.4 驱动装置布置 10 2.1.5 刮板链的布置 10 2.1.6 溜槽的布置 13 2.1.7 张紧装置 14 2.2 参数确定 18 2.3 动力元件选择 19 2.3.1 电动机与马达的比较 19 2.3.2 液压马达的选择计算 20 2.4传动系统确定 25 3.转运机构技术设计 26 3.1链轮的设计计算 26 3.1.1 链轮齿数选择和圆环链的选择 26 3.1.2 链轮的各部分几何尺寸计算 27