各种车库门遥控器的匹配方法（Matching method of various garage door remote controller）.docVIP

各种车库门遥控器的匹配方法（Matching method of various garage door remote controller） Then according to the key code required on the remote control (2 or A Except B, unlock key), the code lamp lit by the flash can be changed. Thirteen, the old (New) Aonuo remote control: Round (black, white shell host for the old; blue for the new logo), OMNER, the original Buick handle shape, left foot button under the letter R. The host position two were fired and distance learning key learning key, to increase the learning settings. Please press the handle to launch The way of learning: 5 seconds to launch two key learning, one meter outside the press any key two times, learning the lights flash 3 times, successful learning. Then increased, according to a study key, according to the remote control. In turn up to 8 handle. Fourteen, Weston: 1, open the shell A total of 5 red light and a button on the circuit board, 2. 3, according to the 4 key four red light long press button, all five lights lit. 4, according to the remote control code. Success in learning. Fifteen, the German Mark: 1, the motor English Name: MARANTECM A total of 8 red lights, the host is respectively 2 3, there are three buttons: + and - P 4, press the P button to press all lights on, 7 lights 5, press the remote learning success. 6 and then press the P key to exit. Sixteen, jiahe: The motor is provided with 4 keys K1 K2 K3 K4 According to the K4 of the code According to the remote control, the success of learning. Seventeen, horse 350 The outside of the motor is provided with 4 keys which are + and P S The remote control code according to the S key left motor and a half meters of code. Eighteen, Shipley Te white: Repeatedly press the SET button, until the remote learning indicator lights, digital display L. Study: according to the + button, the digital tube flash slowly, said learning success. Click + Key, can learn a transmitter. After the completion of learning, according to the SET key to launch the debugging status. Fo