吊顶工艺流程（Ceiling process）.docVIP

吊顶工艺流程（Ceiling process） Ceiling decoration process 1. suspended ceiling decoration process The construction process of the 2. grille ceiling The construction process of 3. caisson ceiling 1. suspended ceiling decoration process: (a) structure of suspended ceiling The suspended ceiling is generally composed of three parts: suspender, skeleton, surface layer. 1.. (1) whosefunction: under the surface layer and the ceiling keel frame load, and the load bearing structure of tea passed to the roof. (2) the materials: most of the use of steel. 2. skeleton A. skeleton role: loads of ceiling surface layer, and transfer the load to the roof bearing structure through the boom. B. skeleton materials: wood frame, light steel keel frame, Aluminum Alloy keel frame etc.. The structure of C. framework: including the main keel, keel and joists, joists, a small grid forming machine. Light steel keel and keel Aluminum Alloy in T type, U type, LT type and various special-shaped keel etc.. 3. layer A. surface: interior decoration, sound absorption, reflection and other functions. B. surface materials: gypsum board, fiber board, plywood, plastic board, mineral wool, Aluminum Alloy metal plate, PVC plastic plate etc.. C. surface form: a rectangular type, etc.. (two) the technique of suspension. (1) Aluminum Alloy light steel keel, ceiling keel: The bomb line to install the hangers to install keel frame, mounting panel. (2) PVC plastic board ceiling: Play the line to install, installation, installation of frame girder wood plastic plate. (three) construction points 1. should be activated in the walls at both ends of the standard high pressure line, fixed wall, cement and wall nail fixation. According to the design elevation, along the wall around the bomb line, as the standard line ceiling installation, the level of allowable deviation + 5 mm. 2. in case of caisson ceiling, should be fixed by layering layering, corner connection. Pay attention to set aside as export lines. The ceiling area,