安规（Safety）.doc

安规（Safety） 1 all staircases, platforms, passages, railings should be kept intact, iron plate must be laid firmly. Iron surface should have lines to prevent slipping. 2, prohibit walking and sitting in the railing, bearing pipe, coupling, safety cover or operation of equipment, such as the need to work in the pipeline when sitting, must take safety measures. 3. No standing, crossing, climbing, or passing appliances are prohibited on the belt or other related equipment, whether in operation or in operation. The crossing belt must pass through the toll bridge. 4, all kinds of coal transport equipment, before permission to start the overhaul work, the operator on duty must cut off the power supply, and hang a warning card. 5, both sides of the coal conveyor belt should be equipped with protective railings and accident stop pull switch. In an emergency, anyone can pull the pull switch and stop the belt running. 6 all lifts, holes, stairways, and platforms must be protected not less than 1050 millimetres high and not less than 100 millimetres high. 7, doors, passageways, staircases and platforms, etc., are not allowed to place debris, so as not to impede access. 8, found that someone electrocuted, should immediately cut off the power supply, so that electric shock from the power source, and first aid. As in his work at height, must pay attention to prevent falling objects to save. 9, coal conveyor belt and drum, generally should be equipped with coal scraper, prohibited in the operation of artificial cleaning belt pulley drum of sticky coal or other cleaning equipment. 10, the accident of four pass principle: the analysis of the cause of the accident is not clear, dont let the person responsible for the accident and education education have been spared, did not take preventive measures, not to let the person responsible for the accident have been sparing treatment. 11, the workers engaged in special operations, we must carry out technical business theory and practical ski