waves（波浪）.doc

waves（波浪） There is a very detailed on-line, very detailed, you did not seriously look for ah, stick to you Recording and making songs: Open the COOL EDIT2.0 interface, enter the single state (green pointed button to switch the single and multi track status click on the top left of the window, select the) effect menu in the refresh effect list, so as to activate the three plug-in before installation, make it play a role. (2) insert accompaniment Open the COOL EDIT software, to confirm whether in the rail state (i.e. the interface display the track 1 and 2 track and other information, such as after entering) in the multi track state, please click on the top left of the window pointed green button (the button for adjusting multi rail and monorail state special adjustment). In the multi track state track 1 click to activate it, select insert menu in the audio file option, and then select the best accompaniment accompaniment (need to insert the MP3 format, if you are using a non standard MP3 format download online accompaniment, select insert menu in the video the waveform file option inserted into the file). (3) record songs Click on the track 2 will be activated, and then click the track 2 red R button, then click on the bottom left of the window of the red tape button to begin recording, recording time, track 1 will also be playing accompaniment, but only 2 vocal tracks recorded a cappella, without the accompaniment of the sound. After recording, click stop button, or click the recording key to stop recording. What needs further explanation here is.., You can move the window with a yellow dotted line position by clicking the mouse, so as to achieve the specified recording starting point, if you want to re recorded before singing some parts, master this method does not need to start again every time. (4) late effects produced a cappella All the steps of this process must be in a state of complete a cappella track monorail. Select track 2, and click the green tip button