地质分层（Geological layering）.docVIP

地质分层（Geological layering） The lithologic characteristics of South first class gas field in ShanGanNing basin lithology ShanGanNing basin is a stable subsidence, depression, migration, clearly twisted multicycle craton sedimentary basin. The basin is further divided into the west margin of seven first grade tectonic units of thrust nappe tectonic belt and Tianhuan syncline, central uplift, North Shaanxi Slope, Weibei area, Jinxi fold wound around the fold zone, around the Yimeng fold zone, central uplift of the main structure in the basin, the basin is larger a construction unit, it has been inherited and developed in the paleozoic. From the analysis of regional geological structure, basin in the western slope area is in deep depression; the central paleo uplift is the tidal zone; the eastern zone is the salt in shallow depression, now I area is located in the North Shaanxi slope structure, master of stratum lithology, it is necessary for field logging. The sedimentary strata of ShanGanNing basin is stable, because during the deposition of erosion, different degrees of differentiation, so a slight change in the thickness, the location of lithology 1 are as follows: I. quaternary system of cenozoic: The lithology characteristics: unconsolidated soil yellow loose sand, bottom conglomerate, thickness: 20 ~ 110m, the 1 area thickness of around 10, pay attention to when drilling changes should be on-site mud logging, drilling slowly remove ground factors, formation and bit bouncing phenomenon, this is the bottom of the well depth the scene, attention characteristics. The thickness of the four series is mainly affected by the Himalaya tectonic movement. The Mesozoic lacks third series of Quaternary rocks, and is in unconformity with the Cretaceous system. Two. Cretaceous Zhidan series: 1., the lithology is brown red mudstone and brown red fine sandstone. The main components of sandstone are quartz and feldspar, the grain size is more uniform, half angular and muddy cementa