介质特性（Dielectric properties）.docVIP

介质特性（Dielectric properties） Combustion: a strong redox reaction of matter, characterized by three characteristics, namely, luminescence, heat generation, and the formation of new substances. The most common and common combustion phenomenon is the combustion of combustible matter in air or oxygen. Conditions: combustible, combustion supporting, ignition source Explosion limit: flammable gas, flammable liquid vapor or combustible dust and air mixture, when reaching a certain concentration, will encounter fire source will explode. To reach the explosive air mixture concentration, called explosion limit Toxic fluid: if there is a very small amount of this kind of material leaked into the environment, can be inhaled or in contact with the human body, even if treated promptly, can cause serious and difficult to treat the harm to human body material. The equivalent of GB5044 I (extreme hazard) poison. Toxic fluid: this kind of material leaked into the environment, can be inhaled or in contact with the human body, such as timely treatment without causing harm to the human body. Not easy to restore the equivalent of II GB5044 level and below (height, moderate, mild poison harm). Flammable fluid: a gas or gasified liquid that can be ignited and continuously burned under operating conditions. Fluid classification A1 refers to the toxic fluid. In fluid - conveying process such as a very small amount of fluid leaking into the environment, can be inhaled or when in contact with the human body, can cause severe poisoning, out of contact, can not be cured. The equivalent of GB5044 I (extreme hazard) poison. Class A2 fluid - refers to a toxic fluid. After exposure to sub fluids, it can be poisoned to varying degrees. It can be cured after contact. It is equivalent to II (GB5044) and below (high, moderate and mild harm) Class B fluids - these fluids are either gases in the environment or operating conditions, or liquids that produce gas by flash. These fluids can ignite and burn cont