照明线路（Lighting circuit）.doc

照明线路（Lighting circuit） Abstract: in this paper, trunk lines and lighting distribution lines in the branch circuit laying modes are discussed in detail, then studied the conductor cross-sectional area and type selection, laying are lighting protection measures and lighting power distribution lines, electrical lighting distribution line finally explains the connection. Key words: power lighting, distribution lines, line laying 1. selection of power lighting distribution line laying Power, low voltage lighting line for the linear distribution, individual sheet distribution, so the engineer can only stay in the level according to the drawings, to be fully familiar with the design drawings, and drawings found at the lack of efforts, timely put forward opinions, to the owners to maintain their interests, but also to improve on their own. At the same time, demand for construction should be familiar with the design drawings, put forward opinions and suggestions on the drawing problems, especially in the construction process, all kinds of pipelines buried this requires coordination arranged in a crisscross pattern, we strengthen the parties at any time, or the site listed to solve, in order to achieve the desired purpose, must grasp the link good in engineering construction. 1.1 lighting, electrical trunk line selection The selection of power, lighting and electrical wiring should be safe, functional and adaptable, and at the same time have some advanced consciousness. In normal operation, the reasonable life of conductor and insulator is provided under the condition of thermal effect during current duration. In addition, the influence of other aspects on the conductor cross section is also considered, such as lightning protection, overcurrent protection, voltage drop and the temperature limit of the terminals of the connected devices. Therefore, how to select cables and wires reasonably and scientifically, and how to select the current carrying capacity of cables and wires