钻孔灌注桩断桩（Bored pile; broken pile）.docVIP

钻孔灌注桩断桩（Bored pile; broken pile） Key words: practice quality, drilling hole, bridge defect, perfusion treatment paper Treatment practice of quality defects of bored pile in Bridge Abstract in this paper combined with the engineering practice of bridge pile defect formation analysis, and several successful processing methods are introduced for the peers. Keywords in Bored Pile in quality defects in treatment With the rapid development of Chinas transportation infrastructure construction, as a kind of bored pile foundation form with its strong adaptability, moderate cost, simple construction and other features will be widely used in highway bridges and other engineering fields. Bored pile belongs to concealed work, but due to the factors affecting the quality of the pile, the construction process each link must be strict requirements, there must be a detailed consideration of the various factors, such as geological factors, drilling process, wall, reinforcement cage floating, concrete preparation and perfusion. If the slightest mistake or measures are not strict, will produce quality accident in bored, small hole collapse, necking loose, large broken pile scrap, causing heavy losses to state property, until the time and have an adverse effect on the quality of the whole project. According to the October 1996 Beijing national survey shows that pile dynamic academic exchanges on statistical data in the pile were detected in about 5 ~ 10% is defective, the defects of the bored pile is as high as 14.7% rate of bad geological; statistical data indicates that the pile foundation test from 1990 to 1998 in Henan Province as the foundation pile breaking rate 5.6% (other defective statistics). Therefore, we must attach great importance to and strictly control the construction quality of bored piles, try to avoid accidents and reduce the losses caused by accidents, so as to facilitate the smooth progress of the project. This paper summarizes the construction of bored piles and t