未在EVMSKAM35X开发板下面做测试,板子的上电,连接.docVIP

未在EVMSKAM335X开发板下面做测试，板子的上电，连接USB到XP系统下之后，提示要安装EVM-SK\XDS100V2驱动，但是驱动在哪里？开发板的两者SD卡找不到驱动，只是linux和android系统程序相关的东西，TI网站也没找到windows下面的资料。 使用AM335X_StarterWare_02_00_00_07开发包，使用evmskAM335x开发板的引导程序，工程路径如下： E:\AM335X_StarterWare_02_00_00_07\build\armv7a\ewarm\am335x\evmskAM335x\bootloader 根据外接25M晶振，在bl_platform.h文件修改各锁相环的配置，以便生成与EVMSKAM335x开发板外接24M时一样的时钟。 /* **Setting the CORE PLL values at OPP100: ** OSCIN = 24MHz, Fdpll = 2GHz ** HSDM4 = 200MHz, HSDM5 = 250MHz ** HSDM6 = 500MHz */ #define COREPLL_M 1000 #define COREPLL_N 24 #define COREPLL_HSD_M4 10 #define COREPLL_HSD_M5 8 #define COREPLL_HSD_M6 4 /* Setting the PER PLL values at OPP100: ** OSCIN = 24MHz, Fdpll = 960MHz ** CLKLDO = 960MHz, CLKOUT = 192MHz */ #define PERPLL_M 960 #define PERPLL_N 24 #define PERPLL_M2 5 #ifdef OPP_SR_TURBO /* Setting the MPU (Cortex) clock at 720MHz */ #define MPUPLL_M 720 #elif (defined OPP_120) /* Setting the MPU (Cortex) clock at 600MHz */ #define MPUPLL_M 600 #endif #define MPUPLL_N 24 #define MPUPLL_M2 1 /* Setting the Display CLKOUT at 300MHz independently ** This is required for full clock 150MHz for LCD ** OSCIN = 24MHz, Fdpll = 300MHz ** CLKOUT = 150MHz */ #define DISPLL_M 150 #define DISPLL_N 24 #define DISPLL_M2 1 /* **Setting the DDR2 frequency to 266MHz */ #define DDRPLL_M 266 #define DDRPLL_N 24 #define DDRPLL_M2 1 在bl_main.c修改main函数如下，增加定时器初始化，测量并打印while(cnt--)的执行时间。 int main(void) { unsigned int tmrcnt; unsigned int cnt; /* Configures PLL and DDR controller*/ BlPlatformConfig(); CPU_TS_TmrInit(); UARTPuts(StarterWare , -1);