6招恢复系统（6 strokes recovery system）.docVIP

6招恢复系统（6 strokes recovery system） 1. last correct configuration A lot of drivers and hardware system fault, sometimes driving a new version appears to be able to improve the performance, but the actual installed on your system when it may cause compatibility problems, update the driver after system can not normally enter the Windows situation is very common. The last time the correct configuration is designed for this design, because when you installed the driver or the system configuration cause the system can not be started, restart and in the process of holding F8, in Advanced Boot Options menu, select the last good configuration, the registry data backup in the normal state the recovery system will, generally can enter the system. 2. repair system files The restore configuration can only repair data in the registry, and if the system file itself is corrupted, then you need to use other methods. The system file is damaged will cause the system unstable, serious or even cause cannot start normally, the correct way is to use a system command SFC to scan the file system, if a file is damaged, will be asked to insert the installation CD and restore the original file. Click start to run, type SFC /scannow in the running box, then start checking when you return, and restart after you finish. If the system in the compact disk is older, it is recommended that the patch be repaired to prevent the file from being restored to the old version. 3. change users The registry in the system mainly consists of two parts, the system branch and the user branch. Some users configure the system environment they use, Cause all sorts of strange faults after login. Do not rush to reinstall the system, this situation can be changed, vest continue to debut. Use the administrator account to login to the system, then create a new administrator account in the control panel to user account and log in with this account. Note that the original users My Documents and other private data in the ori