ad100（ad100）.docVIP

ad100（ad100） Voice automatic alarm AD-110 user manual function Confidentiality: password into programming, password 1~4 bits (composed of 1\2\..9). You can store between 1 and 4 sets of telephone numbers (each group has a telephone number of 15 bits). It can record personal alarm voice with a length of 16 seconds. Easy to program: 7 segment digital display, 2 LED display lights and signal sound prompt, easy to operate. Store information check (including phone number, password and voice information, etc.). Busy check: automatic identification machine busy tone, tone and tone redial preset function. It can connect N.C. and (10.5~16VDC) trigger input signal. Password off alarm. With a pause key for extension. Alarm priority (grab line). index working voltage 10.5~16VDC Electric current Static: 80mA Alarm: 180mA dial mode Audio / pulse (software settings) Trigger mode It can connect N.C. and 10.5~16V voltage to trigger input signal Password storage 1~4 bits (1, 2,..9) Telephone number storage 1~4 (length 15 bits) Alarm voice length 16 seconds temperature Dry, ventilated Operating temperature: 0 degrees ~35 DEG C Storage temperature: -20 degrees ~40 DEG C weight 0.29kg Specifications 165.4 (long) * 114.5 (wide) * 26.4 (high) mm Operational requirement 1, in the input password and programming, press the number keys, there is beep sound, that the input is valid. 2, in the process of programming, if you press the wrong key or enter the password error, there are Didi, Didi alarm sound prompt. 3, factory pre-set password is 11, can be used as the initial entry programming password, if the password input error, allow 4 Repeat the opportunity. 4, power failure information protection: all programming information will not be lost in the power failure, and the password will not be lost Please remember the password. In case you forgot your password, please contact the dealer or the manufacturer directly. 5 and two trigger modes: A) voltage triggering: the trigger voltage must be in