pcb布局设计规则和技巧（PCB layout design rules and techniques）.docVIP

下载本文档

16
0
约5.99千字
约 6页
2017-09-08 发布于河南
举报
版权申诉

pcb布局设计规则和技巧（PCB layout design rules and techniques）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

pcb布局设计规则和技巧（PCB layout design rules and techniques）

pcb布局设计规则和技巧（PCB layout design rules and techniques） PCB layout design rules and techniques The setting technique of grid points in PCB layout design The design requires each point set different at different stages in the PCB stage can be used for the layout of the layout of the device; for IC, connectors and other positioning devices, the layout of lattice precision can be used 50~100mil, and for the resistance capacitance and inductance of passive small devices, can be used 25mil grid layout. The accuracy of the device for alignment and layout of the beautiful. PCB layout rules: 1, in general, all of the components shall be arranged on the same side of the circuit board, only the top-level element is too dense, can be highly limited and small heat devices, such as chip resistor, SMD capacitors, SMD IC on low layer. 2, under the premise of ensuring the electrical properties of the components, should be placed on the grid and parallel or vertical arrangement, in order to tidy and beautiful, in general does not allow overlapping elements; elements are arranged to be compact, components should be evenly distributed in the whole layout, uniform density. 3. The minimum distance between the pads of different components on the circuit board shall be above 1MM. 4, from the edge of the circuit board is generally not less than 2MM., the best shape of the circuit board is rectangular, the ratio of length to width is 3:2 or 4:3., the circuit board surface is larger than 200MM. When 150MM is taken, the mechanical strength of the circuit board should be considered. PCB layout techniques: In PCB layout design, to analyze the circuit board unit, according to the function of layout design, all components of the circuit layout, should comply with the following principles: 1. Arrange the location of each functional circuit unit according to the circuit flow, so that the layout facilitates the flow of signals and keeps the signal in the same direction as possible. 2, each functional u