winxp局域网设置（Winxp LAN settings）.docVIP

winxp局域网设置（Winxp LAN settings） First, enable the guest guest account; Two, control panel, management tools and the local security policy, local policy, user rights assignment, access this computer from the network into the guest account, and refused to remove the guest account for this computer from the network access ; Three, my computer tools folder folder options to check out to remove the use of simple file sharing (recommended) before the hook; Four, set the shared folder; Five, control panel, management tools and the local security policy, local policy, security options, network access: sharing and security model for local accounts to guest only - local users to verify the identity of the guests (optional, this setting can remove access to password dialog box, also can set the classic - local users to authenticate themselves); Six. Right click my computer, property, computer name, and whether there is a name of your LAN workgroup name in the tabs, such as work, etc.. Then click the network ID button, start network identification Wizard, click next, this machine is part of a business network, to connect to other computers at work with it; click next , select use no domain network; click next the back button, and then enter your LAN workgroup name, such as work, click next button, then click Finish to complete setup. Generally through the above steps, basically can be solved. If not, look down again: Seven. Check that the local connection is disabled. Right click the local connection; Eight, close the network firewall; Nine, check if the domain is enabled, whether to join the domain and check the domain settings; Ten, check to see if the server service is closed; Eleven, check the local connection IP, subnet mask, gateway and DNS settings are wrong; Twelve, local connections, properties, routines, checks to see if the Microsoft network file and printer share, the Microsoft network client, and the TCP/IP protocol are installed; Thirteen, some LAN games and softwa