大型机房的布线（Wiring of large computer room）.docVIP

大型机房的布线（Wiring of large computer room） The large room wiring The wiring feature of large computer room is how to put thousands of wires in order. To manage the line, first of all how to plan the layout of the computer room, and then the layout of the bridge is reasonable. The construction of the main frame of the engine room can be divided into suspended ceiling installation and static electricity floor installation. System engineering in the smart room, cable bridge is the main artery, various types of cable is nerve, the computer network is the central power supply and grounding is to ensure that each part of ring connected, interdependent, indispensable. Must be carefully designed, carefully organized, carefully constructed, in order to ensure the smooth flow of the system, running freely. The construction of main bridge and branch pipe is the key process affecting the construction period of the project. Therefore, it is necessary to pre order the construction in advance to ensure the construction of the end of the keel before the end of the construction. The construction of the main bridge and the branch pipeline shall be carried out in strict accordance with the design requirements and construction plan, and the route alignment shall be carried out before the start of the laying, and the direction shall be parallel to the axis of the building. The main bridge of the installation of the ceiling, the ceiling should be used upside down dragon hanger and with 10-12 round, along the wall adopts the triangle bracket. The spacing between hangers or supports is usually 2000mm. Taking into account the bridge in the adjustment, wiring and future maintenance and maintenance process may be on the pedal, must have a certain carrying capacity, because the line down, Longmen hanger every 6-8 meters should use 30 x 30 x 4mm angle iron production. Considering the installation of lights (embedded) in the ceiling, the minimum installation height of the main bridge and the branch