单一电压输出ACDC开关电源方案设计书.docVIP

中文摘要 开关电源广泛应用RCC型开关电源及其设计应用，RCC电路与其他（如半桥逆变）开关电源电路相比的优越性。它的体积小、不需专用PWM控制芯片、电路简单等优点使其应用更加广泛，特别是在各种新兴电子设备的电源、充电器方面的应用尤为突出，因此在各种开关电源中占有重要地位。RCC电路包括输入整流滤波，吸收电路,开关管保护电路,RC反馈振荡,输出整流滤波,输出过压、过流保护电路，另外最主要的是高频变压器部分。最后通过仿真、调试达到100—240V市电交流输入、5V电压0.5A电流输出的要求，并且纹波较小效率较高。 关键词：开关电源 RCC 自激 反激变换器 外文摘要 Title Design of single output AC/DC Switching Power Supply Abstract Switching Power Supply is widely uesd,and its efficiency is more than 80% .Meantime a wide range , high frequency and miniaturization is presented .It is particularly applied in the field of high and new technology and then brings miniaturization and convenice.The development and use of Switching Power Supply are of importance in the energy saving and environmental protection.This paper mainly introduce RCC cicuit and its specific designment; RCC cicuit ,who is small shape,simple structure and not using particular chips,has many more advantages than other circuits as same with it,such as half-bridge ciucuit.Therefore,RCC circuit is much more widely used,especially in the source and charger of all kinds of new electronical devices.So it is such a significance for Switching Power Supply.In the RCC circuit,the circuit for rectification and filtering,absorption,protection,RCC fee- dback,output overvoltage and overcurrent are included.In addition,the transformer is the most important component.Finaly,this design get though tests with 100-240V AC input ,5V voltage and 1A current.Moerover,ripple wave is quite small. Key words： Switching power supply Flyback converter Self-excitatiion RCC 目录 1 引言 1 1.1课题背景和意义 1 1.2开关电源分类、特点及原理 1 2 RCC电路 4 2.1 RCC拓扑分析 4 2.2 RCC电路整体设计 5 2.3 电路元件参数计算及选择 6 3 Saber软件仿真 13 4 电路调试与数据分析 15 4.1 电路调试 15 4.2 数据分析 18 结论 19 改进建议 19 参考文献 20 致谢 21 1 引言 1.1课题背景和意义 随着电子技术的迅速发展，各种电子设备和人们生活、工作的关系日益紧密，而电子设备却离不开可靠的电源。特别是开关电源产品广泛应用于LED照明、通讯设备、工业自动化控制、科研设备、仪器仪表、医疗设备等领域。自激式无须外加信号源能自行振荡，完全可以看作是一个变压器反馈式振荡电路。它激式完全依赖于外部维持振荡根据激励信号结构分类可分为脉冲调宽和脉冲调幅两种脉冲调宽是控制信号的宽度脉冲调幅控制信号的幅度，两者的作用都是达到稳的效果使振荡频率维持在某一范围内。微型低功率开