【2017年整理】压电发电能量储存方法的初步研究.pdfVIP

302 Vol.30 No. 2 20084 PI ZO L CT CT RICS ACOUSTOOPTICS Apr. 2008 :2008) 曾 平, 佟 刚, 程光明, 杨志刚, 唐可洪, 阚君武 ( , 130022) :, , ,, , ,15 mAh 2 h , 80 mAh 7 h , , :; ;; :TG156 : A Initial Research on the Methodof Storage for Piezoelectric Energy Harvesting Devices ZENG Ping, TONG Gang, HENG Guangming, YANG Zhigang, TANG Kehong, KAN Junwu ( School of Mechanical Science and ngineering, Jilin University, Chang chun 130022, China) Abstract: Piezoelectric materials have a crystalline structure that provides a unique ability to convert an applied electrical potential into a mechanical strain or vice versa, or convert an applied strain into an electrical current. U sing the latter of these tw o properties this paper investigates the ability to use this energy from the piezoelectric to charge a discharged battery. It is found that the pow er output by a piezoelectric material is capable of recharging a discharged battery. With a lowfrequency excitation of a piezoelectric plate, it is demonstrated that a 15 mAh battery can be charged in less than tw o hours and 80 mAh battery can be charged in less than seven hours. T he finding that piezoelectric materials can be utilized for recharging batteries opens the w ay fowards most microelectromechanical systems, in which pow er can be supplied by self. Key words:piezoelectric; power harvesting medium; energy generator; battery charging [ 1] , , , 1996 , Mikio Umeda [ 2] 1 试验设备 1998 , Jhon Kymissis 1. 1 , [ 3] 1 , , 0. 3 mm 0. 3 mm , , , , 2005