铜与铝钢异种金属焊接工艺设计.docVIP

河南机电高等专科学校 毕业论文 毕业论文题目：铜与铝/钢异种金属焊接工艺设计 系 部 材料工程系 专 业 焊接技术及自动化 班 级 焊接123班 学生姓名 学 号 1213033 指导教师 周慧琳 2015年4月29日  铜与铝/钢异种金属焊接工艺设计 摘要 近年来,随着生活水平的不断提高,人类生活的各个方面已经越来越离不开电冰箱和空调器等制冷设备的使用。制冷设备中,换热器的性能直接影响设备的制冷性能。 国内外制冷设备管路系统中的蒸发器和冷凝器采用铝管代替铜管己成趋势。但铜管在一些制冷管路构件中仍是不可替代的,近年来铜价攀升和铜资源的短缺，然而铝/钢的资源较丰富，可以成为铜的很好的替代材料。因此必然带来铜铝/钢管连接问题。 而铜与铝/钢性能差异较大,焊接时存在多种问题。铜铝/钢属于异种金属，焊接过程中易形成脆性相，影响接头性能。因此，焊接问题成为阻碍铜铝/钢管应用的一个很大问题。 本文通过分析异种合金的物理、化学性能差异，了解了异种合金焊接性特点以及容易出现的焊接缺陷，列举和介绍了常用的几种铜与铝焊接方法的基本原理和焊接规范。 本文对于铜与钢的焊接做出了新的焊接工艺设计，通过用激光对铜钢接头进行焊接，缩短了焊接时间，优化了焊接性能，使焊接热输入量更加容易且精准的控制，能够更易得到较好的接头。 关键词： Cu/Al管；Cu/Fe管，电阻压焊；钎焊，激光焊  铜与铝/钢异种金属焊接工艺设计 Abstract In recent years, with the continuous improvement of living standards, every aspect of human life has been more and more used without refrigeration equipment, refrigerators and air conditioners and other more away. Refrigeration equipment, refrigeration performance of the heat exchanger performance directly influence the equipment. The evaporator and condenser cooling equipment in the pipeline system at home and abroad by using aluminum instead of copper has become a trend. But the copper in some refrigeration piping components is still irreplaceable in recent years, the shortage of copper prices rose and copper resources, however, aluminum / steel resources are abundant, can be a good substitute material of copper. So it will inevitably bring about the copper and aluminum / steel connection problems. Copper and aluminum / steel performance differences, there are many problems in welding. Aluminum / steel dissimilar metal belongs to, easy to form brittle phases in the process of welding, influence of joint performance. Therefore, the welding problem become a big problem of aluminum / steel. In this paper, through physical, chemical properties analysis of the difference of dissimilar alloys, and easy to understand the welding defects dissimilar