基于nsga-ii算法vienna整流器多目标优化-中国电机工程学报.pdf

第 36 卷 增刊 中 国 电 机 工 程 学 报 Vol.36 Supplement Sep.30, 2016 2016 年 9 月 30 日 Proceedings of the CSEE ©2016 Chin.Soc.for Elec.Eng. 179 DOI ：10.13334/j.0258-8013.pcsee.161315 文章编号：0258-8013 (2016) S-0179-07 中图分类号：TM 46 基于 NSGA-II 算法 Vienna 整流器多目标优化 常伟，王久和，陈启丽 (北京信息科技大学自动化学院，北京市 海淀区 100192) Multi-objective Optimization of Vienna Rectifier Based on NSGA-II Algorithm CHANG Wei, WANG Jiuhe, CHEN Qili (School of Automation, Beijing Information Science Technology University, Haidian District, Beijing 100192, China) ABSTRACT: This paper presented a multi-objective 0 引言 optimization design method with the discrete variables for 整流器系统要求高效性、低成本和重量轻，因 Vienna rectifier’s power circuit. A multi-objective optimization problem can be established with the objective function of 此整流器的各部分需选择合适的元器件，如选择的 models about power density and efficiency and the constraint 器件性能指标总损失低、尺寸小和价格适中，才能 of the component database built by the parameter of input 满足系统多方面性能的要求[1-3] 。然而，上述性能指 inductor, IGBT, Diode and output capacitor. The NSGA-II 标之间相互冲突和存在很大的提升空间，如在降低 algorithm is used to process the problem of a multi-objective 整流器尺寸、重量、成本的同时提高其功率密度、 optimization with discrete variables and finding the pareto 效率和可靠性[4-6]，这需使用合适的方法权衡和提高 optimal solution of a very large solution space quickly and accurately, and the right choice of components can be made by 各个性能指标，使总体性能达到最优[7]，整流器主 performing the trade-off analysis for the optimal solution when 要性能指标提升空间趋势如图 1 所