学校大型机MM5模块的编译和运行.docxVIP

学校大型机MM5模块的编译和运行各模块的编译和单机运行一样，不多说，Makefile里的intel部分的修改LOCAL_LIBRARIES= -L/usr/lib/gcc-lib/ia64-suse-linux/3.3.3 -lg2c 然后各目录下make intel（用intel的编译器）。主要说MM5模块的编译和运行，因为是并行运算，所以一定要用MPP的，学校root2下面有模式包，把MPP包解压放到MM5模块下面，修改congfigure.user文件，注意要修改第5部分的MIX,MJX（重要！尽量改大些）修改第7部分的PROCMIN_NS和PROCMIN_EW加入学校大型机的编译环境，如下#-----------------------------------------------------------------------------# 7g3. SGI Altix with Intel compilers and SGI MPI# Thanks to Dr. Gerardo Cisneros |SGI (Silicon Graphics, S.A. de C.V.)#-----------------------------------------------------------------------------RUNTIME_SYSTEM = altixMPP_TARGET=$(RUNTIME_SYSTEM)LINUX_MPIHOME=/usr# LINUX_MPIHOME=/sw/sdev/mpt-ia64/1.11-100OPT = -O3 -IPF_fp_relaxed -ip -tpp2 -w -ftz -fno-alias -fno-fnalias -gFC = ifortCC = iccMFC = ifortMCC = iccMLD = ifortFCFLAGS = -I$(LIBINCLUDE) $(OPT) -safe_cray_ptr -DDEC_ALPHA -DMPILDOPTIONS = -O3 -ipLOCAL_LIBRARIES = -lmpi# LOCAL_LIBRARIES = -L/sw/sdev/mpt-ia64/1.11-100/lib -lmpiMAKE = make -rAWK = awkSED = sedCAT = catCUT = cutEXPAND = expandM4 = m4CPP = /usr/bin/cpp -C -P -traditionalCPPFLAGS = -DMPI -DDEC_ALPHACFLAGS = $(OPT) -DMPI -DDEC_ALPHA -DSGI_IA64 -DMPI2_SUPPORTARCH_OBJS = milliclock.oIWORDSIZE = 4RWORDSIZE = 4LWORDSIZE = 4-----------------------------------------------------------------------------------保存退出修改目录下UTil的makedeck.csh文件加入一行条件语句else if ( $RUNTIME_SYSTEM == altix ) then echo Making mm5.deck for mpp; set sufx = mpp保存退出在MM5目录下make mpp (make 最好也做一下，修改完参数的时候要重新make mpp）完成后应该在Run下有mm5.mpp这个文件，修改文件名为mm5.mpp.2x4在MM5模块目录下，make mm5.deck修改deck里面的相应参数./mm5.deck把runmm5.csh拷在Run目录下，runmm5.csh的内容如下：--------------------------------------------------------------------------#!/bin/csh -xif ($#argv 2) then echo Usage: $0 PROCMIN_NS PROCMIN_EW exit 1endif@ NPROC = $1 * $2@ BUFS = 16384 / $NPROCif ( -e /etc/SuSE-release ) then set NUMP = `topology | grep CPUs | awk {print $1}`else set NUMP = `hinv | grep Itanium 2.*Processor | awk {print $1}`endif@ LASTP = $NUMP - 1@