风机盘管（Fan coil unit）.docVIP

风机盘管（Fan coil unit） Fan coil knowledge A. Develop and develop all kinds of fan coil units Selection of fan coil units, in addition to the cooling capacity of the cooling load calculation to meet the requirements, but also meet the requirements of the sensible heat and latent heat, heat and moisture than the room to meet the requirements; air shall meet the air temperature, ventilation frequency and air flow requirements etc.. With the application scope of fan coil unit expanding, the type of air conditioner room will be more and more different. The ratio of heat to humidity is not the same in air-conditioned rooms with different properties and different uses, and the matching of air quantity of cold quantity should not be unchangeable. Even if the air conditioning requirements and net volume in the same room, due to differences in weather conditions, or towards the enclosure structure, will lead to the cooling load, obviously to make fan coil with different structural characteristics, to meet the different needs of the room. At present, the majority of fan coil units are three row tubes, each row of 8 pipes of the same form, obviously can not meet the requirements of different rooms. Even if the cooling load to meet the requirements, may also lead to low load due to room air flow and ventilation frequency caused by temperature gradient and fluctuation is too large, reducing the precision of air conditioning and comfort; if you use the same air units, and may cause high load due to insufficient cooling room to ensure the temperature and humidity requirements. Therefore, different conditions and requirements of the air-conditioned room, should be selected for different types of fan coil. Some experts advocate the development of two row fan coil units, which can reduce the air supply temperature difference and increase the number of ventilation, To improve the accuracy and comfort of air conditioning. The same cooling capacity, the use of small temperature difference,