风量计算（Air volume calculation）.docVIP

风量计算（Air volume calculation） General fan is selected according to the temperature difference, Q=CM* temperature difference, you can calculate the amount of air, ha ha. About the pressure, is mainly based on the temperature to count, D=101235/ (287*273+t), to calculate the density calculated under different temperature and pressure, because the fan standard pressure is under normal temperature pressure conditions is 24 degrees, for your reference. Http:///forumdisplay.php? Fid=12? We are generally based on air volume and wind pressure to choose, how much resistance, of course, should also consider The size of the wind pipe is nothing but to meet the ventilation standards, the total air volume will not be reduced, which requires different wind speed in the wind pipe The branch of the air duct shall ensure the sectional area * wind speed = total air volume The choice of oven machine, just pay attention to the following points: 1, first of all, look at the temperature of the oven 2, clear the inner volume of the oven 3, depending on the material of the product 4, depends on the wind pipe installation, into the wind and roast The distance of the box and its winding degree Selection: generally we use the oven fan for the heat preservation fan, there is air cooling, water cooling and high temperature plug-in fan At present, the use of water-cooled more, and the price is reasonable, just add a cooling tower, Air volume: internal volume * cycle times *60, in which the number of cycles, dehydration, paint curing, powder curing different, about 3-15 times Air pressure: we usually say that an elbow has a partial loss of 50 kpa, Wind speed: fan outlet wind speed is smaller, 3-8m/s, each branch wind speed 5-15m/s First of all, must be clear fuel: gas or fuel? Second: single fire or double fire, whether or not need mother fire device? Third: what is the required heat energy? Fourth: manufacturers of special requirements and the need for high-end products, that is: quality brands F