D67F4型气动衬氟蝶阀-上海高特自动化仪表厂.docVIP

D671F4型气动衬氟蝶阀 D671F4 pneumatic rubber-lined butterfly valves 用途及特点 Applications and features D671F4型气动衬氟对夹蝶阀是将聚四氟乙烯树脂（简称F4）或聚全氟乙丙烯树脂（简称F46）采用模压方法置于钢质蝶阀阀体的内壁和阀板的外表面，利用其在抗强腐蚀介质方面的独特性能做成耐腐蚀蝶阀。 D671F4 pneumatic fluoride lined wafer type butterfly valves line the PTFE resin ( F4 in short), Daiflon（F3）or exhaustive fluorinated ethylene propylene(F6) onto the inner wall of the steel body and the outer wall of the steel plate by molding, so as to provide an anticorrosion ability by means of the special property of strong ability in resisting corrosion of the lining. 聚四氟乙烯俗称“塑料王”，它的抗腐蚀性能极佳，除了熔融碱金属，元素氟及芳香烃类外，在各种浓度的盐酸、硫酸、硝酸、有机酸、强氧化剂和各种有机溶剂中均呈惰性反应，将聚四氟乙烯内衬于阀门内壁，既克服了聚四氟乙烯材料强度低的弱点，又解决了阀门主体材料抗腐蚀性差、成本高的不足。故具有可靠的耐腐蚀性和密封性，耐腐蚀寿命可提高5-10倍。配用气动或电动执行机构可组成气动或电动调节、切断衬氟蝶阀，广泛应用于化工、石油、冶金、医药、电力、环保等工业自动化控制系统中对酸、碱等强腐蚀气体、液体介质的控制。 PTFE, known as the “king of plastic”， has a good performance of anti-corrosion. It is inert in various concentration of hydrochloric acid, sulfuric acid, nitric acid, organic acid, strong oxidizer and all organic solvent except molten alkali metal, fluorine and aromatic hydrocarbons. With the PTFE lined inner wall, the valve overcomes the weakness of low intensity of PTFE, poor anti-corrosion ability of the base materials and high cost, and thus resenting a reliable anti-corrosion ability, seal property and the service life of anti-corrosion increased by 5-10 times. It can be used with air-operated or electric actuators to form a pneumatic or electric regulation or shutoff fluoride lined butterfly valves, which can be widely used in industrial automation control system including chemistry, oil, metallurgy, medicines, power, environment protection, to control the high corrosive gas and liquid medium of acid and alkali. 主要特点： Main features 1）、阀体结构独特，密封性能好，泄漏量极小； 1) Special body structure, good seal property and very low leakage 2）、适用介质种类多：特别是任何浓度的酸、碱、氯盐、硫化氢、强氧化剂等； 2) Applicable to various mediums, especially to various concentration of acids, alkalis, chloride,