大转动平面梁有限元分析的共旋坐标法-工程力学.PDF

23 I Vol. 23 Sup. I 2006 6 June 2006 ENGINEERING MECHANICS 69 1000-4750(2006)Sup.I-0069-04 * 1 2 (1. , 410081; 2. , 410082) Newton-Raphson FORTRAN NPFSAP O242 A CO-ROTATIONAL PROCEDURE FOR FINITE ELEMENT ANALYSIS OF PLANE BEAM UNDER LARGE ROTATIONAL DISPLACEMENT * 1 2 CAI Song-bai , SHEN Pu-sheng (1. College of Resources and Environment Science, Hunan Normal University, Changsha 410081, China; 2. College of Civil Engineering, Hunan University, Changsha 410082, China) Abstract: Although many plane beam elements of large rotation have been developed, much of these early works were surprisingly sophisticated and worth improvement. Starting from geometric and physical relations of the plane frame, this work successfully applied co-rotational procedure to derive non-linear asymmetric tangent stiffness matrix of plane beam element under large but small-strained rotational displacement. Nonlinear finite element iteration procedure is also established by the Newton-Raphson technique, and a corresponding FORTRAN program NPFSAP completed. Numerical analysis results of high accuracy for beams, square and circular frames of large rotational displacement are thus computed and obtained. Computations indicate that formulations for the nonlinear element are of higher performance and validation, and that the nonlinear solution procedures are of rapid and stable convergence. The method and its program NPFSAP could be helpful for engineering designer