基于labview的双横臂独立悬架运动特性测试系统 motion characteristics testing system for double wishbone independent suspension based on labview.pdfVIP

2016年 仪 表 技 术 与 传 感 器 2016 第7期 Instrument Technique and Sensor No.7 基于LabVIEW 的双横臂独立悬架运动特性测试系统 1 2 2 来 鑫 ,陈辛波 ,方淑德 (1.上海理工大学机械工程学院,上海 200093;2. 同济大学新能源汽车工程中心,上海 201804) 摘要:双横臂独立悬架构件之间的运动关系复杂且直观性差。 为了直观获得双横臂独立悬架的运 动特性,设计了一种参数可调的双横臂独立悬架实验台及基于LabVIEW 的网络化测试系统。 该系统利 用多个传感器实时监测实验台各部件参数并通过CAN 总线传输这些数据。 利用CAN/ USB卡实现数 据的上下位机交换,在上位PC机上利用LabVIEW调用动态链接库(DLL)文件设计测试界面,实时显 示、记录悬架的运动特性曲线及数据。 实验结果表明,该系统能对双横臂独立悬架的运动特性进行有 效测量。 关键词:LabVIEW;双横臂独立悬架;运动特性;CAN 总线;高速捕获 - - - 中图分类号:U461 文献标识码:A 文章编号:1002 1841(2016)07 0064 04 Motion Characteristics Testing System for Double Wishbone Independent Suspension Based on LabVIEW 1 2 2 LAI Xin ,CHEN Xin-bo ,FANG Shu-de (1. School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China; 2. Clean Energy Automotive Engineering Center,Tongji University,Shanghai 201804,China) Abstract:Doublewishbone independent suspension is a kind of widely used suspension structure,andthe moving relation- ship between its components is complicatedandintuitive.Inordertogetthemotioncharacteristicsof doublewishboneindepend- ent suspension,a kindof double-wishboneindependent suspensionexperimentequipmentthatmotionparameterscanbeadjusted and test system based on LabVIEW were designed. Inthis system,key parameterswerereal-time detectedusing multiple sensors and these datawere transferred through CAN bus. The data exchange mode between upper and lower computer was bui