激光头（Laser head）.doc

激光头（Laser head） The composition of the laser head The laser head is composed of 1. to 2. lens, collimating lens, 3. polarizing prism, 4. prism, 5. mirror, 6.1/4 wave plate, 7. focus error detection optical system 8., a tracking error detection optical system of optical parts and optical system, 9. focus control servo mechanism (F-ACT), 10. the tracking control servo (T-ACT) servo mechanical control part, and the 11. semiconductor laser diode, 12. split photodiode PD (photo diode) and other optoelectronic components. The laser head mainly includes: laser generator (also known as laser diode), semi reflective prism, objective lens, lens and photodiode. When the laser head reads the data on the disk, the laser emitted from the laser generator is converged on the objective lens through the semi reflecting prism, and the object lens focuses the laser into extremely small light spots and hits it on the disk. At this point, the reflected material on the disc reflects the reflected light through the objective lens and then onto the semi reflecting prism. At this point, since the prism is a half reflecting structure, it will not let the beam penetrate it completely and return to the laser generator. Instead, it will reflect through the lens and reach the photodiode. Since the surface of the disc records data at uneven points, the reflected light will be sent in different directions. People will send signals in different directions, defined as 0 or 1. The LEDs receive data that is arranged in 0 and 1, and eventually parse them into the data we need. Laser head principle and structure Since the digital audio CD CD 1982 12cm diameter of the advent of digital video disc D (digitalvideodisk) has been a dream of a new generation of CDs, although a few years ago there was VCD, but for CD, no change in technology, but the data compression, the quality is only VHS level, but is a transitional product, not formed in foreign market. The digital image signal has the advantages of not be