环氧树脂种类（Types of epoxy resin）.doc

环氧树脂种类（Types of epoxy resin） Epoxy resin has experienced more than 50 years of research and development, and has developed hundreds of varieties of specifications: Glycidyl ester type epoxy resin: 1. glycidyl ether type epoxy resin 1.1 bisphenol A epoxy resin: Bisphenol A epoxy resin is one of the most widely used resins, accounting for 90% of the total output of epoxy resins. In the molecular structure containing hydroxyl and ether bonds, the curing process further generates new - OH and - O, which makes the cured material with high cohesion and adhesion. Therefore, metal, ceramic, wood, cement and plastic can be bonded. In addition, bisphenol A epoxy resins are non-toxic resins, and the lowest oral lethal dose of LD50 in mice is 11.4g/kg. Table 1 grades and properties of bisphenol A epoxy resin New brand, original grade, appearance viscosity (Pa.s), softening point (DEG C), epoxy value E - 55 616# 680.550.56 light yellow viscous liquid E - 51 618# 10160.480.54 light yellow viscous liquid E 44 6101# yellow 20400.410.47 high viscosity liquid E - 42 634#. 2127 0.380.45 E - 35 637#. 2035 0.300.40 E - 31 638# 4055 0.230.38 light yellow viscous liquid E - 20 601# yellow transparent solid 6476 0.180.22 E - 14 603#. 7885 0.100.18 E - 12 604#. 8595 0.100.18 E - 06 607#. 110135 0.040.07 E - 03 609#. 135155 0.020.04 E - 01 665# liquid 30400.010.03 1.2 bisphenol S epoxy resin Bisphenol S epoxy resin is a high temperature resistant epoxy resin obtained by condensation of bisphenol S and excess epoxy chloropropane under alkaline conditions. Bisphenol S is a pale yellow solid, developed by the Northeast Petrochemical Research Institute, under the name of 4, 4 - two hydroxy two benzene diglycidyl ether epoxy resin, amine, anhydride and imidazole were cured bisphenol S, the cured product has high heat deformation temperature, thermal stability and good performance characteristics. This is because the molecules strong sulfone group - SO2 - instead of isopropyl in the bisphenol A, i