第五部分 机电运输 判断（The fifth part is the judgement of electromechanical transportation）.doc

第五部分 机电运输 判断（The fifth part is the judgement of electromechanical transportation） Electromechanical transportation I. judgment questions 1 in each replacement of the wire rope, the main components of the connecting device must be inspected for flaw detection and can be used continuously after qualification. (V) 2 Lane car speed should not exceed 5m/ s. (x) 3, the corrosion of the hoisting rope of mine is divided into 4 grades, (*) The use of 4 shaft cage hoisting test, safety gate must be with tank and signal blocking. (V) 5. belt conveyor driven by rollers is not suitable for flame retardant conveyor belts. (x) 6., scraper conveyor is strictly prohibited, and in the formulation of safety measures, you can transport materials. (V) 7 the hydraulic device of the mobile scraper conveyor must be complete and reliable. (V) 8 tilt the use of train roadway in inclined roadway is a must in the protective equipment outage can be decoupled from the rope, to stop the vehicle. (V) 9 rake loader in the corner of the roadway (rock) coal, in order to ensure safety, in the corner of the steel rope must be directed by a special person. (x) 10 pass scraper conveyor, is strictly prohibited from the end of the scraper conveyor beginning to the middle of the chute, so as not to occur in the middle groove convex. (V) 11 when the face is hard, the gangue or pyrite nodules should be taken by coal mining machine. (V) 12, in order to ensure the safe use of shearer and scraper conveyor, the coal mine safety regulations stipulates that the interlocking device of scraper conveyor which can stop the working face must be installed on the shearer. (V) 13 the steel wire for lifting steel wire has black and rust. Pitting corrosion, pits and other damage can also be used as lifting personnel, but must be strengthened. (x) 14., coal mine safety regulations provides that: lifting the steel rope must be checked quarterly, the use of wire rope should be based on the roadway conditions and corrosion, at l