红木维修技术（Redwood repair technology）.doc

红木维修技术（Redwood repair technology） Paint furniture repair technology I. tools needed for furniture repair Furniture repair special blade Furniture repair special wood powder: when use, first put the wood powder in the defect parts, slightly higher than the surrounding, then drip 502 glue glue. Furniture repair special 502 glue: used for bonding wood powder and sealing sealing parts of trauma. Special block for furniture repair: used to help smooth, wrapped in sandpaper and used to draw. Furniture repair special sandpaper: mainly used 240400600 Mo dry sandpaper,water sandpaper. 240 used for rough grinding, 400600 for fine grinding,water sand paper is mainly used for surface requirements, relatively fine, polished use. Special coarse cotton sand for repairing furniture: used for sanding and sanding parts. Furniture repair special fine cotton sand: mainly used for shaping, after grinding the last process, used for grinding. Because of its soft texture, no scratches after grinding, fine, also used for brushing paint after polishing treatment. Special brush for furniture repair: brushing and coloring. The correct use is to tilt 45 degrees so that the paint is smooth without stripe. Hair dryer: used for brushing, quick drying Blade: mainly used for scraping, to determine the roughness of the repair site, and also to determine the flatness of the inspection plane. Two, paint repair commonly used materials Pigment paste Paint solution mixture Three, repair procedures Plastic - - glue, polishing - - hit the background - - above color - - draw lines - drying, polishing A conventional reinforcing method: put the damaged parts of the edge clean with the shovel, fixed 502 drops of glue, empty places, with the shovel pressing compaction, then pour wood powder, wood powder much higher than the surrounding plane, drop 502, faster, let the glue infiltration bottom, with the shovel forced compaction, so as not to dry after the collapse. If the damage is too deep, d