约克操作手册mics（York operation manual mics）.doc

约克操作手册mics（York operation manual mics） MICX series microcomputer controller Operating instructions Please read the operating instructions carefully before use so as to master the correct and safe method of use. Subject to change without prior notice 2008 Edition Safety precautions 1. Please read all safety precautions carefully before operating the unit. 2, safety precautions in various lift safety related matters, please strictly abide by. 3. Symbols used in this manual Warning: this warning must be followed so as not to result in injury to the user. Note: the contents of this notice must be observed so as to avoid damage to the machine parts. Be careful： Please read the labels posted on the controller in detail 4, installation After reading, please keep this technical manual in order to take it out at any time. At the same time, please submit this manual to other operators for your reference! Warning: use only the attachments specified by our company and request installation and technical services to manufacturers or authorized dealers. If the control accessory is improperly installed, it may lead to malfunction or electric shock of the controller. The user must not try to repair it himself. If the controller is not properly repaired, it may lead to an electric shock or damage to the controller. If you need any repairs, please contact the manufacturer. (1) DFS-310 module machine control board; Note: the DFS-310 module control panel must be installed in the mainframe, a flat surface with no snow, leaves or waste accumulation. The installation center generally has a strong line through, and the other control board also has AC220v through. The installation position of the control panel shall be in accordance with the principle of separating the strong and weak electricity and keeping the control panel and contactor as much as 100mm. (2) MICS centralized controller; Warning: the MICS central controller must be stable. Otherwise, it may cause bodily injury or damage to