编程108（Programming 108）.doc

编程108（Programming 108） programming (F) clockwise circular interpolation (G02) and counter clockwise circular interpolation (G03) discriminant direction is along the coordinate plane in circular direction to the positive direction to clockwise counterclockwise direction is G02, G03. (F) different CNC machines may use different numerical control systems, but the NC program instructions are the same. (T) use I and J to indicate the center of the circle of the arc, and the increment value must be used. (F) a primary program calls another master program called a primary program nesting. (F) when writing a surface machining program, the smaller the step size, the better. (T) the purpose and function of using subroutines is to simplify programming. (F) the auxiliary function M00 instruction for the unconditional program pause, the execution of the program instruction, all the moving parts stop moving, and all the modal information is lost (T) arc interpolation, for the whole circle, its starting point and the end point coincide, and R programming can not be defined, so we can only use the center coordinates programming. (T) tool position offset compensation can be divided into two types: tool shape compensation and tool wear compensation. (T) surface processing method in the method of tool path generation in three axis machining programming for spherical polyhedron knife on triangle surface and arbitrary data description. (T) a 8 bit computer is a microprocessor. The width of data is 8 bits. (T) the relative trajectory is the locus of a fixed point relative to a moving coordinate system. (T) the purpose of program debugging in NC machining is to check whether the program is correct, and then to unify the programming zeros, the machining zeros and the machine tool zeros. (T) the feeding path of NC machine tools is not only the basis for programming trajectory calculation, but also affects the machining accuracy and surface roughness of workpieces. (F) IF[ ]GOTO n conditiona