技术组织措施（Technical organization measures）.doc

技术组织措施（Technical organization measures） Technical safety organization measures (1) technical regulations for dynamic monitoring of roof; 1, monitoring content: each move top and bottom move near and move near speed, prop prop up force, prop work resistance, two lane advance pressure roof dynamic parameter. 2, monitoring the main monitoring parameters: 1) layout of work face survey line, each inclined 10 meters, lay a piece on the work surface. 2) pumping station pressure: refers to the pumping station pressure gauge. 3) strut initial force: refers to the hard line for the first row, just after the measured pressure. 4) work resistance: the pressure measured by the strut after loading. 5) the amount of the top and bottom shifting: the difference between the height of the hard roof and the top height of the top cut line. 6) top and bottom moving speed: refers to the length of the support column divided by the pillar position near the roof move. 7) two lanes take three points: they are 2M, 5M and 10M apart from the coal wall. 8) instrument: ZYY - 40 pressurized single hydraulic prop working surface resistance tester. 9) each cycle must be measured. (two) roof management technology safety measures 1, technical requirements 1), head of the working surface transportation use 4 8, 4 8 on the tail root with fl typesteelbeams supporting the roof beams, each 4.1 meters long along strike two erection, a set of alternate forward use and articulated beam and single pillar supporting the top elevation is strictly prohibited. Two groups of adjacent beam center distance of 0.8 meters, group two beam spacing of 0.1 meters, each beam under the guarantee of 3 single body support, must do the valve head (tail) on both sides of steel pillars were. Each beam shift after shift to the beam back along the beam direction, with two hinged hinged beam, respectively with single prop up by up tight, working face roof and a hinged girder adjacent interlocking group carried tent center distance of