技能安全知识（Skills safety knowledge）.doc

技能安全知识（Skills safety knowledge） 1. electric welding and gas welding (safety knowledge, six) 1. personnel who have not been trained by specialists are not allowed to carry out welding work. The welding of boiler and pressure vessel and pipeline equipment; the welder must in accordance with the rules of boiler supervision (welder examination part) requirements, basic and supplementary examination after passing the examination, and holds a certificate, will be allowed to work. 2. welders wear canvas overalls, with hat, jacket no tie in your pants. The pocket shall be covered, the foot should shoe cover, so as to avoid the welding to burn. 3. the use of defective welding tools and equipment is prohibited. 4. no welding is allowed on equipment with pressure (liquid pressure and gas pressure) or live equipment. In exceptional circumstances, safety measures must be taken when soldering is carried out on a pressurized and charged device. And approved by the factory (bureau) in charge of production (Chief Engineer). Welding of load-bearing structures must be approved by the relevant technical departments. 5. prohibit welding on containers containing flammable or explosive substances or on structures or other objects that are wet painted. 6. banned flammable items in the storage room for welding, welding in the vicinity of inflammable and explosive materials, the minimum horizontal distance of not less than 5 meters, and according to the present situation, take safety measures (covered with a screen or asbestos board). 7. for containers containing residual grease or flammable liquid, the lid must be opened and cleaned. For containers that contain flammable and explosive materials, they should be washed by steam or cleaned with hot lye. And open the lid to permit welding. Banning open welding or cutting in the 8. winds of more than 5, but the wind in the following 5 more than 3 open welding or cutting, erection of wind screen so as not to cause fire sparks. 9., rain, snow, not