数控加工操作规程（NC machining operation rules）.doc

数控加工操作规程（NC machining operation rules） I. safety operation rules for NC practice 1, students enter the NC workshop practice, must pass the safe and civilized production and machine operation rules of learning. 2, before operation, must carefully check the technical condition of the machine tool, fixture, tool and workpiece clamping must be good, can carry on cutting. In case of abnormality, report to the teacher in time to prevent accidents. 3, students must operate on the machine designated by the teacher, not arbitrarily open other peoples machine tools, when a person in operation, others may not interfere, in case of accidents. 4. The cutting process must be simulated with a graphics card before cutting. It can be done without the teachers approval. 5, the processing process is not allowed to leave the machine without permission, in case of emergency, should press the red emergency stop button, after correction can be processed again. 6 、 after processing, the cleaning and lubrication maintenance of the machine tools must be carried out. 7, we must pay attention to the boot and shutdown procedures, civilized operation. 8, in accordance with the safety provisions of civilization placed tools. 9, tools and equipment damage compensation. Two 、 safety operation rules of CNC lathe 1, students enter the NC workshop practice, must pass the safe and civilized production and machine operation rules of learning. 2, according to regulations, wear good labor protection equipment before operation, before operation, must carefully check the status of CNC lathe, fixture, tool and workpiece clamping must be good, can operate. In case of abnormality, report to the teacher in time to prevent accidents. 3. Students must operate on the machine designated by the teacher and turn on and off in the correct order, Milling can be carried out by the teachers consent. 5, the normal operation of the machine is prohibited by emergency stop, reset button, milling processing is strictly prohib