新建 6（Newly build 6）.docVIP

新建 6（Newly build 6） Bored pile is a common foundation form in pile foundation, and multi plate is a kind of high efficiency special bored pile. At present, it has been widely used in the construction of housing construction. It has the advantages of less economic investment, less adjacent interference and large bearing capacity. The construction of bored piles has many kinds of work, such as measurement work, mechanical operation, reinforcement processing, support plate expansion, hole cleaning and pouring. It can be described as many kinds of engineering, high technical content and many influencing factors. In the construction process, prone to excessive deviation of pile position, hole bottom sediment side, floating steel cage, pile concrete segregation, broken pile, mud and other quality problems, these quality problems often make the pile to meet the design requirements, and to remedy the difficulties, can not be completely through the post check to determine the existence of the problem we must strengthen the quality control of each link, preparation, hole, hole cleaning, reinforcement cage, pouring underwater concrete construction in the whole process of construction, to take effective preventive measures, in order to ensure or enhance the quality of bored pile. 1. quality control basis and quality control target 1.1 quality control basis Bored pile construction quality control on the basis of the following documents: the contract documents; the design drawings and technical requirements; Specification for design and construction of pile foundation in the industrial and civil buildings; SPECIFICATION (JGJ9494) the building pile foundation design and construction; SPECIFICATION (GBJ789 and GB500072002). When a technical indicator is inconsistent with each other in the above documents, a standard for the implementation of the project shall be determined. In general, priority should be given to the provisions of the contract document. 1.2 quality control objectiv