木蜡油配方（Wood wax oil formula）.docVIP

木蜡油配方（Wood wax oil formula） Wood wax oil formula Searching for a strong man on the Internet, his formula is like this: A bottle of turpentine 14 yuan 1 pounds can sell oil paint or chemical store to buy common white candles, considering the beeswax bad to buy 8 yuan 1 pounds: tung oil: oil paint, color by: first bowl to half a bowl of turpentine to Baicheng small candle into a short turpentine root half the candle will bowl in the water pot on the stove heating candles will soon be integrated into the turpentine completely dissolved into the oil a little stir is completely cooled paste wipe with a cloth without liquid wax prior to the tung oil pigment into the turpentine colored oil wood surface must be used more than 300 sandpaper smooth then rub the wax again can feel than to buy the wood wax oil to lubricate The modeled on after a period of time, tracking, he posted that wood wax effect after half a year is not good, very sticky, also called gray. So I tried again. Finally, the following ingredients are identified: tung oil, castor oil, insect film, palm wax, beeswax, and Taobao Talking about the function of tung oil, needless to say, the basic raw material of wood wax oil. Beeswax is used to seal the moisture in the wood; the shellac is increasing what do not know; palm wax is hard wax, and it can increase the anti knock wood surface anti sliding ability; castor oil is used to melt the wax palm. Say it and do all the ingredients. From left to right, they were shellac, palm wax, tung oil, castor oil, beeswax, too big to take on so much, so they didnt show up. Process: First, heat the wax through water until the wax melts slowly. Pour the tung oil into the wax and pour it over while stirring. Two, palm wax into castor oil, water heating, stirring, until the palm wax melted, palm wax in the castor oil into the tung oil in the side, while the edge of stirring. Three melt the insect film with alcohol and pour it into the mixture just now. If it is too thick, add cast