柜子尺寸（Cabinet size）.docVIP

柜子尺寸（Cabinet size） Considerations to be considered in wardrobe design: 1. In the design should consider the convenience of use, below 650mm, the general design for small items in the 650-1850mm scale design is commonly used in seasonal clothes, in the above 1850mm design for seasonal goods and not commonly used clothes. If you want to do it, usually under the cabinet 2100mm, all the rest of the otc. Under the cabinet too high, the door is demanding, the possibility of long deformation to increase a lot, then even shorter than short, not very good-looking. 2. Drawer top surface height is best less than 1250mm, especially older peoples room, more should consider in 1000mm or so, so use more smoothly, height in 150-200mm, width at 400-800mm. If the use of sliding doors, is 2 doors, it can not be designed in the 1/2 position, is 3 doors, it can not be designed in the 1/3 and 2/3 position, otherwise your drawer is not open, and 4 or more will not consider the location. 3. Pants rack space should be retained with 650mm, if you use a hanger, you should retain at least 700mm. 4. Plywood and plywood spacing at 400-600mm, too small and too large for placement. 5. Wardrobe depth in 530-620mm, in general, we southerners people, wardrobe depth in 580mm, plus the door, the entire wardrobe in the width of 600mm, this width of clothing, there will be no big problem. 6. A short, set minimum to have the height of 800mm. 7. Long clothes are no less than 1300mm height. 8. If you do the sliding door, leave the 75-80 slide position in the position of the sliding door. 9. Generally, the skirting line of the cabinet is 5mm higher than the skirting line. When the skirting height is unknown, the general design is 100mm. Some decoration company in order to achieve the integrity of the wall, often used to do a cut OTC design than the high ceiling, some baseboard, so that the entire cabinet height control in less than 2400mm. It makes a whole wardrobe to the door, and not divided into two secti