剖析a method for the determination of dynamic resistance of photovoltaic modules under illumination.pdfVIP

ARTICLE IN PRESS A method for the determination of dynamic resistance of photovoltaic modules under illumination J. Thongprona,b,, K. Kirtikaraa,c, C. Jivacatea,c a Clean Energy Systems Group (CES), Bangkok 10140, Thailand bRajamankgala University of Technology Lanna, Northern Campus, Chiangmai 50300, Thailand cKing Mongkut’s University of Technology Thonburi, Bangkok 10140, Thailand Abstract Dynamic resistance of solar cells and modules have been determined from a dark IV characteristic curve. In the determination, it is often assumed that series resistance Rs is small and the shunt resistance Rsh very large, their effects can be neglected. The resultant dynamic resistance can be called the external dynamic resistance RD. RD is normally taken to be the slope of the IV characteristic of a cell or a module. We present in this paper a new method to determine an internal dynamic resistance Rd of a photovoltaic module based on one illuminated IV curve, taken into account finite series and shunt resistance. In the experiment, we measure illuminated and dark characteristics of a 4.5 Wp commercial X-Si solar module (9 V, 500 mA) at 25–27 1C, and calculate Rd and RD. We see that Rd and RD can be markedly different. Comparison is also made on the series resistance Rs and shunt resistance Rsh determined from single IV curve and two IV curve methods. Keywords: IV curve; Dynamic resistance; Series resistance; Shunt resistance 1. Introduction A dynamic model of a solar cell or a module consists of three types of resistance. The first one-series resistance Rs, can be determined by more than 20 methods under various illumination conditions such as dark, constant illumination and varying illumination and Corresponding author. E-mail addresses: t_ju