CIMofCatamoldBASF陶瓷粉末注射成型准则.docVIP

Catamold Feedstock for Powder Injection Molding - Guidelines for processing CIM feedstock 催化成型(Catamold)射料用於粉末注射成型 – 陶瓷粉末注射成型的射料使用準則 Release : 14th/July/2009 From BASE web資料來自德國巴斯夫網站 Translator of Chinese中文譯者 Notes : Blue text 注解: 藍色文字 Blue text is special note for Chinese readers from the translator Dr.Q. 藍色文字為譯者Dr.Q對中文讀者提供的特別注解。 Dr. Qiu Yaohung (Dr. Q), VP and GTO of Chenming Electronic Technology Co., Ltd (company web site: ). Dr. Q is one of student of Professor Lin (Dr. S.T. Lin, Paul. He is a professor of the Department of Mechanical Engineering Technology, National Taiwan University of Science and Technology). Professor Lin was one of student of Professor R.M. German. Dr.Q is a technical adviser of MIM-CN alliance (MIM China alliance) also. 邱耀弘博士(Dr. Q), 台灣晟銘電子科技有限公司技術長。Dr.Q為林舜天教授(Dr. S.T. Lin, Paul，國立台灣科技大學機械工程技術系教授)的大弟子，林教授則是Dr. R.M. German的弟子之一。Dr. Q亦兼任中國金屬粉末注射聯盟(MIM-CN)的技術顧問。 1. Introduction 簡介 Powder Injection Molding (PIM, Ceramic: CIM, Metal: MIM, Cermet:CMIM) is a process which offers advantages over conventional production methods for small parts with complex shapes or large production numbers. Starting from fine ceramic or metallic powders, a homogeneous feedstock is produced by mixing with a thermoplastic binder. The thermoplastic binder serves to combine in one manufacturing process the shaping capability that is well known from polymeric materials with the also well-established powder sintering technology. After the molding stage the shaped parts are liberated of the binder and the remaining powder preshape is then sintered to a high density part. 粉末注射成型(PIM, 陶瓷:CIM, 金屬: MIM, 瓷金: CMIM)是有別於過去傳統製程，提供產品一種小而複雜、產量需求大的快速製程。不論採用金屬或是陶瓷粉末，將之與熱塑性塑膠材料的黏結劑均勻的混合成為射料(Feedstock中國地區習慣稱為：喂料)，熱塑性黏結劑與粉末充分混合後，作為一貫化的注射過程中用來塑造產品形狀之能力是眾所周知的，同時也是在粉末燒結上熟知的技術。在成型完成以後的階段，部分的黏結會分解釋放，剩餘的部份則維持其它固體粉末的預形狀(通常是等比例放大的形狀，所以用Preshape來表示)，然後經過燒結到達高密度零件。 The Catamold feedstock is based on a Polyacetal binder, a semi-crystalline thermoplastic material with good processing characterist