iom 7546301 delta p-粉尘收集差压变送器.pdf

Delta P Control Installation and Operation Manual Installation, Operation, and Service Information This manual is property of the owner. Leave with the unit when set-up and start-up are complete. Donaldson Company reserves the right to change design and specifications without prior notice. Illustrations are for reference only as actual product may vary. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. English IOM 7546301 (ENG) Master Language Revision 11 Donaldson Company, Inc. Process owners/operators have important responsibilities relating to combustible hazards. Process owners/operators must determine whether their process creates combustible dust, fume, or mist. If combustible dust, fume, or mist is generated, process owners/operators should at a minimum: • Comply with all applicable codes and standards. Among other considerations, current NFPA standards require owners/operators whose processes involve potentially combustible materials to have a current Hazard Analysis, which can serve as the foundation for their process hazard mitigation strategies. • Prevent all ignition sources from entering any dust collection equipment. • Design, select, and implement fire and explosion mitigation, suppression, and isolation strategies that are appropriate for the risks asso