用于mini与周立功非接触式ic卡模块通信.docVIP

一个在linux下的串口程序例子????用于mini2440与周立功非接触式ic卡模块的通信头文件#include QThread#include unistd.h#include string.h#include errno.h#include sys/types.h#include sys/stat.h#include fcntl.h#include stdlib.h#include stdio.h#include unistd.h#include termios.hclass Cardreader : public QThread{????Q_OBJECTpublic:????Cardreader();????int fd_port;????int open_port(int comport);????int set_opt(int fd,int nSpeed, int nBits, char nEvent, int nStop);????int initcardreader(int fd_port);????unsigned int checkcard(int fd_port);????unsigned int readcardid (int fd_port);????int beep(int fd_port);????void autorun(void);????void sendmessage(int data);signals:????void message(QString);protected:private:}; cpp文件#include cardreader.hCardreader::Cardreader(){}int Cardreader::open_port(int comport){????????/* 打开端口 成功返回文件描述符 失败返回0*/????????/*open COM Port*/????????/* comport=1 open COM1 comport=2 open COM2 comport=3 open COM3*/????????//char *dev[]={/dev/ttySAC0,/dev/ttySAC1,/dev/ttySAC2};????????long??vdisable;????????int fd;????????if (comport==1)????????{????fd = open( /dev/ttySAC0, O_RDWR|O_NOCTTY|O_NDELAY);????????????????if (0 == fd)????????????????{????????????????????emit message(Open port error 1);????????????????????????return(0);?????????????? }????????}????????else if(comport==2)????????{????fd = open( /dev/ttySAC1, O_RDWR|O_NOCTTY|O_NDELAY);????????????????if (0 == fd)????????????{???????????????????? emit message(Open port error 1);????????????????????????return(0);????????????????????}????????}????????else if (comport==3)????????{????????????????fd = open( /dev/ttySAC2, O_RDWR|O_NOCTTY|O_NDELAY);????????????????if (0 == fd)????????????????{???????????????????? emit message(Open port error 1);????????????????????????return(0);????????????????????}????????}????????if(fcntl(fd, F_SETFL, 0)0)????????{???????????? emit message(Open port error 2);????????????????return(0);????????????}????????if(isatty(STDIN_FILE