事故分析论文：变电站事故分析系统实现及变压器故障识别新方法研究.docVIP

事故分析论文：变电站事故分析系统的实现及变压器故障识别新方法的研究 【中文摘要】随着我国智能电网2.0计划的启动,以及“十二五”规划关于建设坚强的智能电网的要求,高性能微机保护装置、高精度故障录波器、电子式互感器等自动化装置在电网中应用的愈加广泛,使电网的二次侧设备呈现出规模化、智能化的特点。为了充分、高效利用这些设备记录的庞大的数据信息,满足智能电网事故分析的要求,非常有必要设计一套具有强大数据收集、事故分析功能的信息平台——基于录波和保护信息的变电站事故分析系统。该系统能将涉及电网安全运行的故障录波信息、继电保护动作信息,在变电站内就进行筛选和处理,分析出事故发生的时间、地点、故障类型、进行评判等,并形成故障简报。力求把上传调度的信息简单化、清晰化、明了化,减轻调度主站端的压力。而且还能方便运行人员快速、准确的进行事故处理。然而现有的变电站事故分析系统对两种信息融合不充分,分析功能有限,分析算法不够可靠,尤其是对变压器事故分析的功能及算法方面还有待于完善。针对上述问题,本文设计一套基于录波和保护信息融合的变电站事故分析系统,并在此平台做进一步的完善,研究可视化的变压器事故分析子系统。该系统能够将涉及变压器安全运行的保护故障录波信息和变压器故障录波信息分别进行两次融合,筛选出重要的录波数据、综合处理有用信息;并且研究一种新的识别励磁涌流的方法(C-SVC励磁涌流识别方法),该方法以统计学为理论基础,吸收了现阶段多种识别变压器励磁涌流方法的优势,提高变压器事故分析的正确率。在对事故做出迅速、准确的判断的同时,形成故障简报。并将简化的关键信息上传给调度中心。调度中心从全网的角度制定调度方案,以避免局部故障影响全网。 【英文摘要】With the plan of 2.0 start smart grid, and the “second Five-Year” plan on building a strong smart grid requirements, high-performance microprocessor-based protection devices, precision fault recorder, electronic transformer and other automated devices in the network application The increasingly wide range of equipment to the secondary side of the grid showing the size and intelligent features.To take full use of these large data records and to meet the requirements of the smart grid,it is very necessary to design a platform - based on information recorded wave and protection of substation accident analysis system. The system can involve the safe operation of power fault recorder information, information on protective actions in the substation to the screening and processing, analysis, accident occurred at a time, location, fault type, the judge, etc., and the formation of fault presentation. Strive to simplify the upload schedule information, clarity, clear, reducing the dispatch center side of the pressure. But also to facilitate the operation quickly and accurately to deal with the accident.However, the existing Accident Analysis System of Substation integration of the two types of information is not sufficient analysis is limited, especially for the fu