dtsd相电子式多功能电能表使用说明书veng.docVIP

068 DTSD1352(DTSF1352) Three-phase Electronic Multifunctional Electric Energy Meter Installation Instruction V1.0 Shanghai Acrel Co., Ltd. Contents 1 Overview 2 2 Main Functions 2 3 Technical Parameters 2 4 Overall Dimension 3 5 Wiring and Installation 3 6 Operation and Display 4 7 Communication 7 1 Overview DTSF1352 three-phase electronic electric energy meter and DTSD1352 three-phase electronic multifunctional electric energy meter are mainly used to measure three-phase active energy of low voltage network, with optional RS485 communication function, which facilitates users in electricity monitoring, centralized read and management. The product has high precision, small size and convenient installation, can be flexibly installed in the distribution box to realize the electric energy measurement, statistics and analysis of different loads in different areas. As the multifunctional electric energy meter, DTSD1352 can also be used to measure voltage, current, power, etc., as well as reactive power. 2 Main Function Function Function description DTSD1352 DTSF1352 Electric energy measurement Active electric energy measurement(forward, reverse) ■ ■ Reactive electric energy measurement (forward, reverse) ■ 　 A, B, C split-phase forward active electric energy ■ 　 Electricity measurement U, I ■ ■ P, Q, S, PF, F ■ 　 LCD display 8-bit LCD display ■ ■ Button programming 4 buttons can program parameters as communication, ratio of transformation, etc. ■ ■ Pulse output Active pulse output, clock pulse output ■ ■ Reactive pulse output □(Multiplex with clock) 　 LED alarm Voltage loss and data verification failure alarm ■ ■ Multi-rate and additional function Support 4 time zones, 2 time intervals, 8 daily time intervals, 4 expense rates □ □ Four maximum demands and occurrence time □ 　 Historical frozen data of last 12 months □ □(No demand) Date, time □ □ Communication RS485 interface, supporting Modbus, DL/T 645-07, DL/T 645-97 at the same