脚手架搭设方法（Scaffold erection method）.docVIP

脚手架搭设方法（Scaffold erection method） Scaffold erection method Fastener type steel pipe scaffold This technology is applicable to a set of steel pipe fastening structure as the main body, to make bamboo scaffolding outside the fence. (1) preparation for construction 1, materials (1): steel pipe diameter is 48 or 51mm, wall thickness is 3 ~ 3.5mm or hot-rolled seamless pipe joints, used as the main column, a large bar, a small bar, inclined support. (2) connecting components: Swivel buckle, right angle buckle, butt buckle and core. 1) the turn buckle is used to connect two rods that intersect at any angle, such as the connection of the main column and the cross. 2) the right angle buckle is connected with two vertical intersecting rods by hand, such as the connection of the main column with the big and small transverse phases. 3) the butt buckle and the core are used for the butt joint of the two steel pipe rods, such as the main column and the big cross bar. (3): the base made of 40 steel and 4 ~ 5mm steel, used for main column stepping. The floor area of the base shall not be less than 200cm2. (4) foot board: bamboo, wood or steel foot board. 1) bamboo steel scaffolding can use thick bamboo row of dense, underlying transverse strip backing, even with a nail; can also be used with the diameter of 4 to 5cm bamboo row, dense drilling of several rows of holes in the hole through No. 8 ~ 10 lead line will link into the bamboo plate. 2) wood foot board can be used at the thickness of not less than 20mm long strip straight spreading board; also can use wood prefabricated board. 3) steel scaffolding can use pattern plate rolling form, can also be used with diameter of 8 mm to 12 short reinforced material welded into sparse arrangement. (5) (bamboo or bamboo), bamboo for vice column (i.e. pin), guardrail etc.. 2, operating conditions (1) according to the characteristics of the project and the construction requirements, compile the erection plan of the scaffold. (2) the site of