蓄电池充不进电故障的检查分析(Inspection and analysis of battery failure of charging).doc

蓄电池充不进电故障的检查分析(Inspection and analysis of battery failure of charging).doc

  1. 1、本文档共7页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
蓄电池充不进电故障的检查分析(Inspection and analysis of battery failure of charging)

蓄电池充不进电故障的检查分析(Inspection and analysis of battery failure of charging) (1) the inspection of the battery failed to enter the electrical fault Storage battery check whether the connection of the charging circuit is reliable and whether the contact is good with the plug; Check the battery box socket and plug whether there is fire burning phenomenon, whether there is line damage, broken line Check the connection in the battery pack, and the charger will not charge when the connection in the battery pack falls off Secure the socket and plug and secure the charging circuit securely. Check whether the charger is damaged and whether the charging parameters meet the requirements. Abnormal charger should be replaced. Check whether the battery has a dry phenomenon (that is, the battery is missing and the water loss is serious). Check whether the plate has irreversible sulfation. This can be determined by measuring changes in the voltage of the battery charge and discharge, if the voltage of battery when charging up quickly, some single voltage high discharge voltage drop quickly, without electricity or electric battery rarely, can judge the battery appeared irreversible sulfation. (2) the treatment of battery failure Fault phenomenon After starting, the indicator of the ammeter is too fast in the running, or the battery temperature is on the high side, and the indicator of the ammeter is still more than ten 5A after a long time running. Failure cause 1) battery strain. 2) there is an internal short-circuit fault. 3) the active material falls off on the plate so that the capacity is too small. 4) plate vulcanization or negative plate hardening. Judgment and elimination of faults If the battery fails to enter the power supply, it is necessary to make a comprehensive analysis based on the fault phenomenon and its usage. 1) if the battery used for more than a year, the above phenomenon, generally for the battery has strain failure, should be replaced by new parts. 2) if the batte

文档评论(0)

jgx3536 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:6111134150000003

1亿VIP精品文档

相关文档