设计施工方案（Design and construction plan）.docVIP

设计施工方案（Design and construction plan） This article is contributed by nebulay DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. United Ceramics Company Limited Design and construction scheme, design and construction plan, design technique scheme design, technique scheme technique (a) the design of anti electrostatic floor tile construction should comply with the following provisions: 1.1 meet the antistatic floor function and aesthetic requirements, and shall comply with the provisions of the 1.2 standards relating to construction engineering ground ground tone should be with the overall environment after indoor decoration coordinated 1.3 ground should not dust, easy to clean, avoid glare 1.4 ground laying height should be determined according to the actual demand (two) anti electrostatic floor tile design reference 1.1 GB50174-93 electronic computer room design code 1.2 GB12158-2006 general guideline for preventing electrostatic accidents 1.3 GB50037-96 building ground design (three) anti-static ceramic tile ground anti-static performance of 2.1 surface resistance: to ensure that meet the static ground the discharge and the human body and the environment and equipment safety Requirements, surface resistance values shall be in accordance with 1 * 106~1 * 109 ohms. 2.2 volume resistance: in order to ensure that the ground meets electrostatic discharge and human and environmental and equipment safety requirements, the volume resistance shall be in accordance with 1 * 106~1 * 109 ohms. (four) anti electrostatic floor tile technical document for construction and acceptance of the 3.1 Reference Information Industry Ministry of industry standard anti-static floor code for construction and acceptance of SJ/T31469-2002 3.2 standard ground and floor construction and acceptance specification GB502209-2002 Http:/// One United Ceramics Company Limited 3.3 Ministry of information