跳眼法测距（Eye jump method）.docVIP

跳眼法测距（Eye jump method） The method of measuring distance with the fingers and eyes is called jump eye, which is an estimate by estimating the field width of the eye. The method is based on the distance between the two pupils, about 1/10 of the length of the arm, and by measuring the width of the field object by 10, the distance from the standing point to the target is obtained. The specific method is: the arm straight forward, thumbs up, close the left eye, right eye sight along the side of the thumb at the target (reference point), on the left side of the head and hands remained motionless, then closed the right eye, left eye sight through the thumb on the same side, and remember the sight alignment field of a point, then the visual target the left (reference point) to the bit width, the width multiplied by 10 is the standing point of the distance to the target. The method is very error free and can only be used for rough estimation. Eye jump method Object oriented, right arm outstretched thumb up to about 60 cm, between the eyes, close to the left side of the thumb through the vision in the right eye was measured, head and hands remained motionless, then closed the eye sight through the left thumb on the same side, and remember the sight of the field to a certain object (with the goal in the same line.). Then, determine the distance between the target and the object (m) and multiply by 10, that is, the distance from the standing point to the target. Sniper knowledge - ranging 2006-07-20 16:03 jump jump eye eye method is a simple China ranging method used by the military. The observer for the goal, stretched out his right hand thumb in between the eyes, close your left eye, right eye by the side of the thumb with the target, then the thumb through the observation of the same side with the left eye, left eye sight alignment objects in mind that estimate between the object and the distance of the target, and then multiplied by 10 times, is the target distance. The thu