身为涂料人必备一些常识性问题（As a paint man, there must be some common sense questions）.doc

下载文档 降价啦

4
0
约1.05万字
约 8页
2017-09-20 发布于河南
举报
版权申诉
保障服务

身为涂料人必备一些常识性问题（As a paint man, there must be some common sense questions）.doc

1、本文档共8页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

身为涂料人必备一些常识性问题（As a paint man, there must be some common sense questions）

身为涂料人必备一些常识性问题（As a paint man, there must be some common sense questions） 1, why in the paint process, it is best to use primer as the bottom fill? Answer: because the primer is designed for filling purposes, it has excellent filling and polishing properties, and is low cost, and if the top coat is used to make the bottom layer filled, the filling effect is poor, and the cost is high. 2. Why do not use transparent putty to fill the wooden eye in the bottom coloring process? Answer: before the coloring, the use of transparent putty, will make the board does not color. If the use of transparent putty after coloring, due to uneven thickness of putty, will affect the uniformity of the color 3, what is the difference between the closing of the bottom and the sealing of the primer? Answer: the bottom penetration is better than the primer. After the film is formed, the seal between the base and the wood fiber is closed, and the film is more dense than the primer. The sealing effect is better. 4. Why should the primer be thoroughly polished before coating the top coat? Answer: 1, increase its adhesion; 2, paint has a strong with the trap, such as primer uneven, then the topcoat coating, coating effect smoothness. 5 、 what is the standard for primer grinding? Answer: 1, 450 corners, no light highlights; 2, frosted glass. At the end of 6, the number of times the paint brush what is the standard? Answer: should be completely filled wooden eyes. That is, by grinding, you can get a smooth paint film effect. 7, why PU paint stressed the main paint, curing agent, diluent supporting the use? Answer: different PU paint has different dilution system, solid content is also different. Such as the use of non matching diluent or curing agent, will affect the cross-linking reaction of paint, resulting in lack of hardness, dry, film cracking and other defects. 8, PU paint in the deployment, why emphasize the proportion of the required proportion? Answer: the ratio of PU paint to curing age