退耦电容（decoupling capacitors）.docVIP

退耦电容（decoupling capacitors） Decoupling capacitors and bypass capacitors are not clear to see! 1. coupling means connection. A 2. coupling element, especially one that directs input and output to produce contact. 3. decoupling devices refer to components that eliminate signal contact. 4. decoupling capacitors, referred to as decoupling capacitors. 5. for example, emitter transistor amplifier has a self bias resistor, it also makes the signal from the pressure drop back to the input form coupled input and output signals, the resistance is a coupling element, if the resistance is connected in parallel with a capacitor, the capacitor impedance of suitable capacity of AC signal is smaller (this requires the calculation) which decreases the coupling effect of resistance, so that this capacitance decoupling capacitor. Bypass capacitor is not a theoretical concept, but a practical method that is often used. In 50 - 60s, the word has its own meaning, and now it is not used any more. An electron tube or a transistor needs to be biased, that is, the DC power supply that determines the operating point. Such as gate tube with negative pressure relative to the cathode are required, in order to work in a DC power supply, the cathode to connect a resistor formed on the cathode current positive potential with a plate, and a gate bias DC grounding, this technique is called self bias, but is on (AC) signal, which is also a negative feedback, in order to eliminate the influence, in this resistor in parallel with a large enough point, this is called a bypass capacitor. Later, some data were extended to similar situations. Capacitance can be basically divided into two categories: coupling capacitor and energy storage capacitor. The decoupling capacitor has two functions between the power and ground of the integrated circuit: One is the energy storage capacitor of the integrated circuit; On the other hand, the high-frequency noise of the device is bypassed. Typical decoupling capacitor va