题库问答题（Question and answer questions）.docVIP

题库问答题（Question and answer questions） What is the purpose of the maintenance work of optical fiber cables? 1, through the normal maintenance measures, continue to eliminate some of the external effects of accidents; 2, continuous improvement in the design and construction deficiencies, to avoid and reduce due to some preventable accidents caused by the impact; 3, in the event of an accident, timely treatment. As soon as possible to troubleshoot, repair the line, to provide stable, high-quality transmission lines. Two, brief description of main maintenance work of pipeline optical cable line 1, regular inspection of the manhole brackets, pallets are intact, whether the signs clear, eye-catching, optical fiber cable outer protective layer and junction box has no corrosion, damage or deformation and other abnormalities, and found problems in a timely manner. 2, regularly check the lining of the manhole line is tidy, and whether the cable and joint box is reliable. 3, found the pipeline or manhole subsidence, damage and well cover lost, and so on, take timely measures to repair. 4. Remove the dirt from the cable in the manhole and remove the water from the manhole . Three. What are the contents of aerial optical cable routing maintenance? Hook 1, finishing, replace the defect, remove overhead optical cable lines and hanging on the debris. 2, cut off the influence of fiber optic cable branches, check the optical fiber sheath and sag are abnormal, and found problems in a timely manner 3. Check whether the junction box and the reservation are safe and reliable. 4, check the suspension line and the power line, radio and other cable line protection device to the place is complete, effective and comply with the provisions of 5, by rod inspection, to make the body solid and upright, and cable and ground anchor strength is reliable, rod iron and ground anchor unearthed rust prevention. Four, brief description of the principle of repairing optical fiber cable obstruction. In acco